Analysis of Bridge Pier as per Different Seismic Zone of India
DOI:
https://doi.org/10.59367/ijfiest.v2i1.14Keywords:
pier, ansys, seismic zone, finite element analysisAbstract
The main objective of this paper is to analyze a bridge pier through finite element method as per different seismic zones of India. In this paper a detail analysis is done of bridge pier by using ANSYS workbench software. This study deals with static structural analysis. A bridge pier model is taken which is built in engapalli nalla on elmidi sankanpalli to maddedroad at ch km 17/10 block- usoor, district- bijapur, C.G. The 3D model is drawn is AUTO Cad Software and six variations are done in model by increasing and decreasing the dimensions of the pier and foundation. Then the seven models are analyzed in ANSYS as per different seismic zones i.e. zone 2, zone 3 and zone 4. The analysis and study is done to evaluate total deformation, directional acceleration, directional velocity, normal stress, shear stress, equivalent stress, normal elastic strain and shear elastic strain for seven different model in three different seismic zones of India.
References
Parisa HosseiniaS, Hooman Ghasemibc, Mohammad Jalayera Andrzej S.Nowakc “Performance-based reliability analysis of bridge pier subjected to vehicular collision: Extremity and failure.†Engineering Failure Analysis, Volume106, December 2019
Lingkun Chen, Lizhong Jiang, Peng Liu “Seismic response analyses of high-speed railway bridge round-ended piers using global bridge model.†International Journal of Materials and Product Technology,July 2012
Rashmi R.Vanahalli, Dr. S.V.Itti “study on RCC bridge pier using ansys†,International Journal of Engineering and Innovative Technology,August 2013
Hayder Ala’a Hasan1, Ammar A. Abdul Rahman1 and Hani Aziz Ameen “Finite element analysis of reinforced concrete bridge pier subjected to seismic loadingâ€, American Journal of Scientific and Industrial Research,2012
Amit Katkar1, Prof. P. M. Kulkarni “Parametric Study of Bridge Piers†International Research Journal of Engineering and Technology (IRJET), January 2018
Digambar B. Patil, Prachi Sohoni and Rushikesh P. Jadhav “Evaluation of Assorted Profiles in Bridge Pier Exposed to Exciting Flood Loadingâ€, Jordan Journal of Civil Engineering, Volume 15, No. 4, 2021
Rupen Goswami and C. V. R. Murty “seismic strength design provisions for reinforced concrete (RC) bridge piers" given in Indian codes in 2002.
T.Subramani, B.Subha , T.Anbu , S.Sasitharan , M.Seetharaman “Design and Analysis of Flyover Bridge By Using SAP", International Journal of Application or Innovation in Engineering & Management (IJAIEM), 2009
Siva Avudaiappan, Kinson Prabu, Deban Selvaraj, Kiran Raja, Paul Oluwaseun Awoyera , and Erick,“Performance of Pier-to-Pier Cap Connections of Integral Bridges under Thermal and Seismic Loads ",Advances in Civil Engineering Volume 2021.
Prasanna and Suresh Kumar,“Simulation of Flow Behaviour around Bridge Piers Using ANSYS – CFD.†International Journal of Engineering Science Invention (IJESI), September 2018
Reshma Babu and Jobil Varghese, “Dynamic Analysis of Metro Rail Supporting Structure.â€, International Journal of Engineering Science Invention (IJESI), April 2018
Dhruv Saxena, “Computational Analysis for Predicting Scouring Around Cuboid Shaped Pier in a Streamâ€, International Journal of Engineering Trends and Technology (IJETT), October 2017
Premsai.T “Structural Analysis and Optimization of Bridge Pier Using ANSYSâ€, International Journal of Engineering and Innovative Technology, March 2015
Published
Issue
Section
License
Copyright (c) 2023 International Journal of Futuristic Innovation in Engineering, Science and Technology (IJFIEST)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
